Jerith Home Additions & ADU Nationwide

Jerith Home Additions & ADU: The Huntington Beach Owner’s Guide

We stock and install Jerith-compatible aluminum components for home additions and ADU projects in Huntington Beach, with typical installed pricing running $45,000-$130,000 for full additions and $90,000-$220,000 for detached ADUs. Most Jerith material orders can be sourced within 48 hours through our distributor network, and we write the price before any work starts. Homeowners usually discover an issue when their Jerith fence or railing system, installed as part of an addition’s exterior envelope, shows corrosion at coastal-grade fasteners or gate sag that worsens after the marine layer rolls in off Bolsa Chica.

Call (657) 288-3368

Which Jerith Models This Applies To

Jerith manufactures ornamental aluminum fencing, railing, and screening under several series lines, and matching the right profile to your existing addition matters for code compliance and visual continuity. The Style 200, Style 400, and Regency series are the most common we encounter on Huntington Beach properties, particularly on second-story additions where the railing must meet ICC-ES AC273 standards for guardrail load.

To identify your series, check the vertical picket profile: Style 200 uses a 5/8-inch square picket with a pressed spear top, Style 400 uses a 3/4-inch square picket with a cast aluminum finial, and Regency uses a narrower 1/2-inch picket with a looped top. The bottom rail channel depth also differs, 1 inch versus 1.25 inches, which affects replacement gate panels. Jerith stamps a date code on the inside face of end posts; pre-2018 posts used a 0.060-inch wall thickness, while current production runs 0.080-inch for coastal markets. We source OEM Jerith extrusions where the color match is critical, typically for visible front-yard additions, and specify equivalent 6063-T6 aluminum from domestic mills for rear-yard ADU screening where the anodized finish is less exposed to salt air.

Signs Your Jerith Home Additions & ADU Is Failing

• White powdery buildup at post bases and rail joints. This is aluminum oxide blooming through failed powder coat, accelerated by Huntington Beach’s salt-laden morning fog. The substrate is corroding beneath the finish, and the structural integrity of the post embedment degrades faster than inland equivalents.
• Gate sag that progresses from a quarter-inch to full latch misalignment within one season. The Jerith trunnion hinge, particularly on pre-2020 installations, uses a nylon bushing that UV-hardens and cracks in south-facing exposures. The gate frame then racks, stressing the welded corners.
• Rattling or clacking in wind events. Picket-to-rail friction points have worn through the factory nylon grommets, common on additions near Pacific Coast Highway where traffic vibration compounds wind load. Left unaddressed, the pickets elongate the rail slots.
• Color shift from bronze or black to a mottled gray. The TGIC polyester powder coat has reached its UV degradation limit, typically 12-15 years in Orange County’s high-sun environment. This is cosmetic until the metal beneath begins pitting.
• Loose post caps that lift in Santa Ana winds. The friction-fit cap design relies on a tight extrusion tolerance; repeated thermal cycling in unshaded ADU patio applications compresses the aluminum skirt. Water then pools in the post, accelerating internal corrosion.

Before

After

Replacement Cost & What’s Included

For Huntington Beach homeowners, Jerith component replacement within an existing addition or ADU project typically falls within these ranges:

The range reflects three variables: whether we match existing Jerith OEM color lots (longer lead, tighter tolerance), whether posts require core drilling through existing concrete footings, and whether the addition’s original permit drawings are available to verify setback compliance. Under Clause 1 of the Haven Standard, we deliver a written price with line-item material and labor before any demolition starts. Our 365-Day Done Right Promise covers the installation; Jerith’s limited lifetime warranty covers manufacturing defects on OEM extrusions. We pull permits when the replacement alters the guardrail height or gate automation, which is standard for second-story additions in Huntington Beach.

DIY or Call Us?

An owner can safely inspect their Jerith system with a flashlight and a tape measure: check post plumb with a 4-foot level, measure gate drop from the latch side to the hinge side, and photograph any powder-coat breaches for our review. What goes wrong in DIY replacement is almost always the post embedment. Jerith posts for guardrail applications require 36-inch minimum embedment in concrete per CBC 1607.7, and Huntington Beach’s sandy soils near the Bolsa Chica wetlands often need 42-inch depths with engineered compaction. A post that feels solid at installation loosens within two wet seasons if the concrete collar is undersized or the base isn’t tamped. We also see DIYers install residential-grade Jerith Series 100 on additions where Series 200 or 400 is code-required for height and load, which fails inspection and requires full removal. For a written price on proper replacement, call (657) 288-3368.

FAQs